Predator Aspire 1-7 Pool Cue

VICTORY TIPS

• 8 layer design holds shape longer
• Top quality leather
• Constructed to the most exacting standards
• Developed to maintain optimum compression for the entire life of the tip
• High contrast color allows for better sighting and shaping in low light environments
• Tested by top professional players

CARE INSTRUCTIONS

WARPAGE – FINISH. Wood will soak up moisture in wet climates and release moisture in dry climates. To prevent warpage or finish problems, store your cue in an environment that has a stable and consistent temperature with a humidity level of 40 to 45 percent.

ABUSE. Cues made of wood are not designed to withstand lateral pressure and should not be leaned or propped up against a wall, dropped on the floor, bent excessively while playing, or hit on a table. We recommend protecting your cue with a case.

TIP DIAMETER. We do not recommend turning your shaft down. You can choose to turn your shaft, but any 3143 shafts turned below 12.25 mm, any Z3 shaft turned below 11.40 mm, and any Fat shaft turned below 12.70 mm will result in an automatic void of your warranty.

PHENOLIC TIP REPLACEMENT. If you want to replace your phenolic tip on your BK2/Bk3 break cue or your Air/Air2 jump cue, do not remove the black carbon fiber tip plate located under the brown phenolic tip as this will reduce the strength of your shaft and void the warranty. Leave .020″ of the brown phenolic before gluing on the replacement tip.

WOOD SHAFT MAINTENANCE. To clean your Predator shaft, use a towel slightly dampened with rubbing alcohol. After cleaning, use a leather burnisher or similar material to seal the shaft. Using a Carnuba wax may also help to seal the shaft and protect it from moisture. To avoid damage, do not sand the shaft; no abrasive is necessary. Do not expose the shaft to excessive moisture and do not steam it to remove dings. Importantly, do not use any water-based cleaner.

THE ORIGINAL UNI-LOC® JOINT. We recommend cleaning the Original Uni-Loc® Quick Release joint when you first receive your cue and every six months thereafter. These joints are precision manufactured to exact tolerances and even a modest amount of dirt can create a problem. You can use a Q-Tip dipped in Isopropyl alcohol to clean the inside threads and bore of the shaft insert. Clean the joint pin and threads with alcohol and a clean rag. We recommend the use of joint protectors to help keep your joint clean and to protect it from damage.

FERRULE. Much of the shaft’s performance can be attributed to our ferrule design and composition. Due to the performance-enhancing material used for the ferrule, scratches may appear with normal use. In this case, we recommend sending your shaft to an authorized Predator repair center for a cleanup. Removing or changing the ferrule will void the warranty.

TIP. The Everest® tip (2nd gen) Or Predator Victory Tips (3rd gen) comes standard on all Predator shafts. If a tip replacement is needed, we recommend a medium-hard tip. For the best results, we recommend that you send it to an authorized Predator repair center for the installation of a new tip.

IMPORTANT. For 3rd Gen Shafts be sure not to remove the V-Tek Fiber Tip Silencer (Tip Pad) when replacing the tip. Removal will void your Predator Shaft warranty.

WRAP CLEANING. For leather and Uni-Loc® Leather Luxe wraps, barely dampen a towel with water, wipe the wrap, and dry it immediately. Use Isopropyl alcohol for Irish Linen wraps.

WARRANTY INFORMATION

As the manufacturer of the highest quality billiards products on the market today, Predator Products (Predator) is committed to the performance and durability of its products. To protect your investment, Predator offers a Limited Lifetime Warranty against manufacturing defects. If you ever experience a problem that you believe is covered under warranty, please return your product to Predator and/or email them at Customer Service. Please note that this warranty does not cover problems resulting from warping or abuse.

Terms And Conditions. Predator warrants solely to the original purchaser of the product, for as long as he/she may own it, that it shall be free from defects in materials and workmanship under normal use. This Limited Lifetime Warranty is non-transferrable and does not apply to asserted defects resulting from: (a) normal wear and tear; (b) modification, misuse, abuse or improper maintenance; and/or (c) damage associated with exposure to extreme temperature or humidity.
This Limited Lifetime Warranty applies only to those products purchased from authorized dealers of Predator. Predator shafts designed for Uni-Loc® and Radial® joints are only warranted when coupled with Original Uni-Loc® and Radial® joints.

Limitation On Obligations. The obligations of Predator hereunder are limited to repair or replacement of any product found to be defective under this Limited Lifetime Warranty. In no event shall Predator be liable for any indirect, incidental or consequential damages, of any nature, or kind or for damages to or loss of property. This Limited Lifetime Warranty is the sole warranty for Predator cues and shafts and is given in lieu of all other warranties, express or implied, including any implied warranties of merchantability and fitness for purpose.

Sole Warranty. This Limited Lifetime Warranty, as set forth herein, constitutes the entire warranty and representation of Predator with regard to its cues and shafts. This Limited Lifetime Warranty shall be controlling over any conflicting terms and conditions of any purchase orders, contracts or invoices that may be executed in connection with the purchase of the product. No representation or warranty made by any Predator employee, dealer or agent shall be binding upon Predator other than as set forth herein.

Claim Procedures. Claims for warranty performance and service shall be made by sending the product, with shipping and insurance prepaid by the purchaser, to Predator Group, Warranty & Repairs, 702 East Chicago Road, Coldwater, MI 49036 together with (a) evidence of original purchase and (b) a completed “Repair/Return Form.” International customers should ship products to the place of purchase or directly to Predator at the above address.

Upon receipt, Predator will review the description of the asserted defect, examine the product and make repairs and replacements as appropriate under this Limited Lifetime Warranty. Upon completion of the service, Predator shall return the product to the original purchaser, with shipping and insurance prepaid by Predator. If it is determined that the asserted defect is not covered under the Limited Lifetime Warranty, the original purchaser will be contacted and offered a repair service if applicable, or the product will be returned.