Coin Op Table Repair Parts

About Coin Op Table Repair Parts

Valley Repair Parts will also fit Dynamo, Fisher, and most coin-op style bar box pool tables repair parts and supplies.

Price

-

Brand

33 Coin Op Table Repair Parts
Valley Ball Dump Spring
Sku: BDS50

Valley Ball Dump Spring

Brand: Penguin
Type: Table Supplies | Coin Op
Valley pool table coin op style bar box replacement ball dump ...
Valley pool table coin op style bar box replacement ball dump spring. Ball tray not returning like it should this spring will fix your problem. Made in the USA.
$2.95
Valley Keyed Alike Lock
Sku: LK512

Valley Keyed Alike Lock

Brand: Penguin
Type: Table Supplies | Coin Op
No need to have more then 1 key to open up your Valley pool ta...
No need to have more then 1 key to open up your Valley pool table anymore. Valley pool table "keyed alike" C512 lock with key. These locks are designed to replace your existing locks in the ball tray and end clean out.
$9.95
Penguin Brand Pool Table Rails Un-Covered for Valley Tables
Sku: 9355U

Penguin Brand Pool Table Rails Un-Covered for Valley Tables

Brand: Penguin
Type: Table Supplies | Coin Op
Size: Valley 93 or Valley 88
Professionally covered replacement pool table rails for Valley...
Professionally covered replacement pool table rails for Valley pool tables.  Penguin Brand  rails are of superior quality and can be ordered for any size pool table. ***If you have a 7' Valley, please find the model number and use this chart to determine your rail type. *Please verify table measu...
$239.00
Penguin Brand Pool Table Rails Covered 3045 for Valley Tables
Sku: 9355C1

Penguin Brand Pool Table Rails Covered 3045 for Valley Tables

Brand: Penguin
Type: Table Supplies | Coin Op
Size: Valley 93 , Valley 88 or Valley 85
Professionally covered replacement pool table rails for Valley...
Professionally covered replacement pool table rails for Valley pool tables.  Penguin Brand  rails are of superior quality and can be ordered for any size pool table. This price includes rails covered in Championship brand Cloth. ***If you have a 7' Valley, please find the model number and use thi...
$313.00
Valley Rail Bolt
Sku: B0640

Valley Rail Bolt

Brand: Penguin
Type: Table Supplies | Coin Op
Valley bar box replacement rail bolts. These bolts are zinc pl...
Valley bar box replacement rail bolts. These bolts are zinc plated with hex head, phillips head, and square drive head combination. Don't take the chance on using the old bolts. Bright zinc plating. Square and phillips head inserts. Hexagonal nut head for use with nut driver. Measurements: 1/4-20...
$1.25
Valley 4 slot Coin Mech for Commercial Tables
Sku: I0053

Valley 4 slot Coin Mech for Commercial Tables

Brand: Penguin
Type: Table Supplies | Coin Op
The Valley Coin Mechanisms is for use on Valley Co-op Commerci...
The Valley Coin Mechanisms is for use on Valley Co-op Commercial tables. The Valley coin mechanism has four slots allowing it to adjust up to $1.00 in quarters
$59.95
4
Sku: 21373

4" Replacement Pool Table Pocket Liners (6)

Brand: Championship
Type: Table Supplies | Coin Op
Valley no logo pool table replacement pocket liners. These rep...
Valley no logo pool table replacement pocket liners. These replacement 4" pocket liners are designed to fit most ball return style pool tables. All 6 pockets are the same so side pockets  may have to be trimmed to fit your table. Set of 6  
$20.00
Valley Coin Mech Inserts
Sku: BIM

Valley Coin Mech Inserts

Brand: Penguin
Type: Table Supplies | Coin Op
Style: BIM - Coin Slot or BIP - Plug
Quarter Valley Coin Mechanism Slots and plugs for Valley Co-op...
Quarter Valley Coin Mechanism Slots and plugs for Valley Co-op Commercial tables. These Valley coin mechanism inserts will allow you to adjust your prices per game.
$2.99
Pool Table Ball Return Gulley Boots (6)
Sku: 21463

Pool Table Ball Return Gulley Boots (6)

Brand: Championship
Type: Table Supplies | Coin Op
Set of 6.  Gulley boots are used on Valley tables along with ...
Set of 6.  Gulley boots are used on Valley tables along with many other commercial and home pool tables with ball return systems. These gulley boots are constructed of durable heavy duty plastic for a longer life.Gulley boots are used on Valley tables as part of the ball return. Each of our gull...
$20.00
Valley Pocket Nail
Sku: PN100

Valley Pocket Nail

Brand: Penguin
Type: Table Supplies | Coin Op
Valley bar box replacement chrome twist pocket nails. 2 per po...
Valley bar box replacement chrome twist pocket nails. 2 per pocket 12 to complete table
$0.50
Valley Coin Mechanism Extension
Sku: CCEL

Valley Coin Mechanism Extension

Brand: Penguin
Type: Table Supplies | Coin Op
Size: Long or Short
Valley or Dynamo bar box replacement Coin Mechanism Extension....
Valley or Dynamo bar box replacement Coin Mechanism Extension. This extension is attached to the end of the coin mechanism with 2 screws and lock washers (10#-32) to activate ball dump. Brackets come in 2 sizes 5 inch, and 6.5 inch lengths with the 2 screws provided.
$12.99
Valley No Logo 3
Sku: 21363

Valley No Logo 3" Replacement Pocket Liners (6)

Brand: Championship
Type: Table Supplies | Coin Op
Valley no logo pool table replacement pocket liners. These rep...
Valley no logo pool table replacement pocket liners. These replacement 3" pocket liners are designed to fit most ball return style pool tables. All 6 pockets are the same so side pockets  may have to be trimmed to fit your table. Set of 6  
$15.00
Valley pocket Buttons
Sku: PBS100

Valley pocket Buttons

Brand: Penguin
Type: Table Supplies | Coin Op
Size: Small 3/16in or Large 1/4in
Valley pocket button are made for holding the corner pocket li...
Valley pocket button are made for holding the corner pocket liners to the corner molding. They are made of nylon and come in 2 sizes 1/4 inch for replacing and 3/16 inch for that hole that had to be drilled out. 2 per corner pocket 8 for complete table
$0.75
1/2 - 13 Valley Leg Leveler Plate
Sku: LLTN100

1/2 - 13 Valley Leg Leveler Plate

Brand: Penguin
Type: Table Supplies | Coin Op
1/2 - 13 Valley Leg leveler plate.  This plate goes on the b...
1/2 - 13 Valley Leg leveler plate.  This plate goes on the bottom of the legs so you can thread in the leg levelers. Dimension are 1 3/8" x 1 3/8"
$2.39
Valley 5 Slot Coin Mech for Commercial Tables
Sku: ESD5

Valley 5 Slot Coin Mech for Commercial Tables

Brand: Penguin
Type: Table Supplies | Coin Op
The Valley Coin Mechanisms is for use on Valley Co-op Commerci...
The Valley Coin Mechanisms is for use on Valley Co-op Commercial tables. The Valley coin mechanism has five slots allowing it to adjust up to $1.25 in quarters. preset at $1.25
$64.95
Valley Coin-Op Leg Leveler
Sku: 5069

Valley Coin-Op Leg Leveler

Brand: Penguin
Type: Table Supplies | Coin Op
Valley pool Table leg leveler. Made of heavy duty case aluminu...
Valley pool Table leg leveler. Made of heavy duty case aluminum base so they wont rust with a steel threaded pin. These leveler measure 4 3/4" wide and have a wrench feature that make the easier to adjust. Priced for single leg leveler. Bolt size: 2 3/8" long 1/2" x 13 thread..
$17.50
Valley Ball Dump Shoulder Bolts - Set Of 2
Sku: SBBOLT

Valley Ball Dump Shoulder Bolts - Set Of 2

Brand: Penguin
Type: Table Supplies | Coin Op
Valley or Dynamo bar box replacement ball dump shoulder bolts....
Valley or Dynamo bar box replacement ball dump shoulder bolts. These bolts are used at the ends of the ball dump tray so that the ball dump moves free and correct with no hold ups or sticking. They come is a sets of 2 with lock washers.
$6.00
Valley Leg Bolts
Sku: LB100

Valley Leg Bolts

Brand: Penguin
Type: Table Supplies | Coin Op
Valley pool table replacement leg bolt are used to attach the ...
Valley pool table replacement leg bolt are used to attach the fiberglass leg to the cabinet. Bolt are 5/16 x 18 thread. 4 per leg 16 for complete table
$1.00
Valley ZD-7 pocket screw
Sku: zdps

Valley ZD-7 pocket screw

Brand: Penguin
Type: Table Supplies | Coin Op
New valley ZD-7 pocket screws with washers inserts. These ultr...
New valley ZD-7 pocket screws with washers inserts. These ultra durable pocket screws have a allen head and are size 10-32 x 1/2". Only the corner pocket use these screws. For a complete set for the table would be 8.
$0.75
Valley Trim Screw
Sku: TS1000

Valley Trim Screw

Brand: Penguin
Type: Table Supplies | Coin Op
Valley trim replacement screws. These screws are used to attac...
Valley trim replacement screws. These screws are used to attach the outside chrome trim. Please order 12 for a complete table set.  Dimensions on the Valley Trim Screws are 5/8x1/8.
$0.30
Valley Keyed Different Lock
Sku: DIFKEY

Valley Keyed Different Lock

Brand: Penguin
Type: Table Supplies | Coin Op
Valley bar box replacement "keyed different" lock with key. Ke...
Valley bar box replacement "keyed different" lock with key. Keep your change safe with the keyed different lock. This key is designed so it will not match the other locks on the table.
$9.95
1/4-20 Valley Rail T-Nut
Sku: TN100

1/4-20 Valley Rail T-Nut

Brand: Penguin
Type: Table Supplies | Coin Op
Valley bar box replacement sawtooth style rail T-nuts. This 1/...
Valley bar box replacement sawtooth style rail T-nuts. This 1/4" four jagged edge T-nut is the answer to your striped T-nut problem. 18 required for complete table
$0.75
Penguin Brand PRO Pocket Pool Table Rails Un-Covered Valley Tables
Sku: 9355UPRO

Penguin Brand PRO Pocket Pool Table Rails Un-Covered Valley Tables

Brand: Penguin
Type: Table Supplies | Coin Op
Size: Valley 93 or Valley 88
Penguin Brand PRO POCKET rails for Valley pool tables. The und...
Penguin Brand PRO POCKET rails for Valley pool tables. The undisputed champion of bar box tables... the pre-2001 93" Valley table. These tables were made to make money fast. The original rails are cut at 43 1/2 degrees at the corners and have a whopping 4 5/8" - 4 3/4" opening that was designed t...
$325.00
Valley Quarter Strip
Sku: VQS

Valley Quarter Strip

Brand: Penguin
Type: Table Supplies | Coin Op
Coin strip for coin operated pool tables, Foosball, and dart b...
Coin strip for coin operated pool tables, Foosball, and dart boards. So everyone knows who is up next.
$7.50
Coin Op Ball Dump Roller
Sku: BDR

Coin Op Ball Dump Roller

Brand: Penguin
Type: Table Supplies | Coin Op
Coin OP pool table ball dump roller. This roller goes on the a...
Coin OP pool table ball dump roller. This roller goes on the arm that activates the ball tray connected to the coin mechanism.  Constructed from  Ultra-high-molecular-weight polyethylene it is durable and will perform smoothly.
$20.00
Penguin Brand PRO Pocket Pool Table Rails Covered 3045 Valley Tables
Sku: 9355C1PRO

Penguin Brand PRO Pocket Pool Table Rails Covered 3045 Valley Tables

Brand: Penguin
Type: Table Supplies | Coin Op
Size: Valley 93 or Valley 88
Penguin Brand PRO POCKET rails for Valley pool tables. The und...
Penguin Brand PRO POCKET rails for Valley pool tables. The undisputed champion of bar box tables... the pre-2001 93" Valley table. These tables were made to make money fast. The original rails are cut at 43 1/2 degrees at the corners and have a whopping 4 5/8" - 4 3/4" opening that was designed t...
$399.00
Valley Trim Moulding Nails
Sku: TRMN100

Valley Trim Moulding Nails

Brand: Penguin
Type: Table Supplies | Coin Op
Valley Trim Moulding Nails used to attach aluminum trim around...
Valley Trim Moulding Nails used to attach aluminum trim around ball return, coin mech recess, and others.Sold Individually
$0.09
Pengiun Brand Pool Table Rails Uncovered for Valley Tables
Sku: 8855WO

Pengiun Brand Pool Table Rails Uncovered for Valley Tables

Brand: Penguin
Type: Table Supplies | Coin Op
Size: Valley 88 or Valley 93
Penguin Brand replacement rails for Valley Pool Tables are hig...
Penguin Brand replacement rails for Valley Pool Tables are high quality and come unfinished so you can pick the profile of rubber and color of cloth that you prefer, these are only blanks. These quality blanks can be made to fit any bar box table. Please refer to the measuring diagram below befor...
$115.00
Valley Corner Casting Bolt - Single
Sku: CCB50

Valley Corner Casting Bolt - Single

Brand: Penguin
Type: Table Supplies | Coin Op
Valley bar box replacement corner casting bolt with washer. Ar...
Valley bar box replacement corner casting bolt with washer. Are the metal corners not secure and rattling? You might just be missing one of these. This is the bolt that holds the metal corner pocket molding secure to the table. 2 Per Pocket 8 Per Table
$1.50
1/4-20 Valley Thread In T Nut
Sku: LTTN100

1/4-20 Valley Thread In T Nut

Brand: Penguin
Type: Table Supplies | Coin Op
Valley pool table thread in rail  T-Nut.  Thread in T-Nuts ...
Valley pool table thread in rail  T-Nut.  Thread in T-Nuts  can be used in replacing standard saw Tooth style t-nuts or can be used to upgrade your table from wood screws. Installed with alllen wrench and are 1/4 inch - 20 thread.   3  per  rail 18 for complete table
$0.75
Valley Pool Table Coin Door
Sku: CDL

Valley Pool Table Coin Door

Brand: Penguin
Type: Table Supplies | Coin Op
Size: Large Door - 10 3/16 x 8 1/4 , Medium Door - 9 3/4 x 7 or Small Door - 8 7/8 x 7
Valley pool table replacement Black Coin door. This door comes...
Valley pool table replacement Black Coin door. This door comes in 3 sizes and is pre-cut for door lock and coin mechanism(not included).
$40.00
Sold Out
Valley Pool Table Coin Mechanism Spring
Sku: I0036

Valley Pool Table Coin Mechanism Spring

Brand: Penguin
Type: Table Supplies | Coin Op
Valley bar box replacement ESD coin mechanism return spring. C...
Valley bar box replacement ESD coin mechanism return spring. Coin chute no returning right these spring will fix that problem. 2 springs required per coin chute
$2.99
Sold Out
Valley Ball Dump
Sku: 20600021

Valley Ball Dump

Brand: Penguin
Type: Table Supplies | Coin Op
Valley or Dynamo bar box replacement ball dump. Convert that c...
Valley or Dynamo bar box replacement ball dump. Convert that coin-op table back to original with a ball tray ball dump.
$100.00