Directions

1. Remove protective coating from top (magic reads right) side of 8 Ball rack. Place rack on flat  
     surface and scrape the surface of the rack until film breaks away, now
    you can peel the film off completely. Rack lettering should be clear when finished. 9/10 ball rack has no coating.
    (Caution: rack has to be on flat surface or you will bend rack)

2.  Place template on the footspot, please make sure the template is aligned
     correctly.

3.  Place the balls on the template into position

4.  Make sure all balls are tight and touching, sometimes this requires just a
     small push with the fingertips.

5.  Enjoy and break with a perfect rack.

6.  Remove the rack after the break; if a ball is slightly sitting on the edge of 
     the rack you can still slide the rack out with ease.  If there is a ball sitting
     directly on the rack leave it in place until that ball has been moved during
     play.

Benefits

• Magic Ball Rack Pro is the elite racking system; it gives a consistent tight rack even on old cloth.
• Magic Ball Rack Pro gives a perfect rack every time, you can rack in 10 seconds or less
• Saves table wear on the cloth from using other triangles
• No need to Tap the table and damage the table
• No need to carry your own triangle with you when you play
• Worn and used balls can be used with a tolerance level of 0.1mm
• Material is water proof, can blend into any table cloth color and can be rolled up to carry around.
• Pool Hall owners can eliminate triangles altogether using the Magic Ball Rack