Rail Fix Help?

[Wood]

Have an older Brunswick table. Have a dead spot and noticed the rubber was loose. Can glue be injected to firm up or will the rail need to be taken apart all together? Is there a fix or will rail need replacing?
Thanks Wood :(

[sonnic]

i recently refelted and put new rails on my table and to be quite frank it isn't that hard to install rail and even easier to take off and fix. I would remove the entire rail wherever it is loose (subrail and all) and then look to see how the felt was secured to the bottom (if its glue that could be a problem but and its possible that you might ruin your felt. if thats the case i would take the rail to a professional and have them do it. but if it is stappled than simply remove the staples from the problem area and reglue the rail. Then simply staple the felt back on the sub rail, put it back on the table and your all set. easy. :)